Jotun Jotafloor can

Topcoats

Jotafloor Filler

A solvent-free, two-component epoxy filler that helps cover imperfections in concrete floors. EN 1529

Documentation
Contact us

About Jotafloor Filler

Jotafloor Filler is a solvent-free, two-component epoxy filler that helps cover imperfections in concrete floors. It can easily cover cracks, spalls, blowholes and other potential irregularities in the concrete surface. The filler has a superior compressive strength that covers the concrete like a film. It offers a compression strength that is higher in comparison to concrete, increasing its resistance to damage.At the same time, it has non-shrink properties, which will prevent cracks and creases in the long run. As it is a solvent-free product, it has low toxicity levels, making it an environmentally-friendly choice. It also has minimal VOC levels, meaning it is suitable for both indoor and outdoor use.The formula of this filler has a low viscosity, making it easy to apply. With a DFT of 200 mic up to 3mm, it offers a smooth base for users to work with. The bond strength is also outstanding, making it a suitable choice for those who require more than one coat of filler. Therefore, it is an excellent option for concrete surfaces that have many cracks, holes and are highly porous. The strength of this filler gives it significant abrasion resistance, meaning it is an appropriate base for highly frequented areas. Once the filler has been applied, the topcoat of choice may be used. EN 1529

Technical details

Product Categories

Topcoats, Fire protection Coatings, Cargo tank Coatings, Floor Coating, Yacht coatings, Fouling Protection, Insulating Coatings, Heat Resistant Coatings, Powder Coatings, Anticorrosive Primers, Mechanically resistant Coatings, Building - Exterior, Building - Interior, Shopprimers, Cargo hold Coatings, Thinners, Tank Linings, Interior Decorative Topcoats, Intumescent Coatings - Cellulosic fire, Industrial Topcoats, Cargo tank Coatings, Concrete and Wood protection, Architectural Topcoats, Industrial Floor Coatings Solutions, Topcoats - Yachting, Car Park Solutions, Fouling protection - Yachting, Fillers - Yachting, Intumescent Coatings - Hydrocarbon fire, Ancillaries - Yachting, Self-polishing Antifoulings, Fouling Release Coatings (FRC), Primers , Sealers and fillers, Insulating Coatings, Heat Resistant Coatings, Automotive Powder Coatings, Zinc Primer, New Construction Primer, Maintenance Primer, Mechanically resistant Coatings, Exterior Primers and Preparation, Pipeline Powder Coatings, Exterior Powder Coatings - Buildings, New Construction Primers - Powder, Concrete and Wood Protection, Interior Powder Coatings, Primers - Yachting, Exterior Powder Coatings, Interior Powder Coatings - Buildings, Interior Decorative Topcoats, Shopprimers, Exterior Steel Protection Coatings - Buildings, Rebar Powder Coatings, Cargo hold Coatings, Thinners, Interior Steel Protection Coatings - Buildings, Interior Primers and Preparation, Tank Linings

Technology

Epoxy

Certificates and Approvals

Certified in accordance with IMO Res.215(82) – PSPC Water Ballast Tanks

Certified in accordance with IMO Res.288(87) – PSPC Crude Oil Tanks

Compliant with IMO Antifouling System Convention AFS/CONF/26 + IMO MEPC.331(76)

Meets the requirement of BS 6920

Meets the requirement of BS 6920-1:2000

Meets the requirement of ISO 20088-1

Meets the requirement of NSF/ANSI/CAN 61

Meets the requirement of the Norwegian Institute of Public Health

Meets the requirements by Lloyd's Register (LR) Class Program for ice going vessels

Meets the requirements of American Bureau of Shipping (ABS) Type Approval Program

Meets the requirements by Russian Maritime Register of Shipping (RMRS) Class Program for ice going vessels

Meets the requirements of ANSI/AWWA C210-92

Meets the requirements of ANSI/AWWA C210-84

Meets the requirements of ANSI/AWWA C210-07

Meets the requirements of API RP 5L2

Meets the requirements of AS 4100

Meets the requirements of AS 4100 Appendix J (Slip Factor)

Meets the requirements of ASTM A775/A775M

Meets the requirements of BS 476 Part 20/21

Meets the requirements of Det Norske Veritas (DNV) Type Approval Program

Meets the requirements of Det Norske Veritas (DNV) Class Program

Meets the requirements of EN 13381-8

Meets the requirements of EN13381-10

Meets the requirements of EN13381-9

Meets the requirements of FDA Title 21, Part 175.300 – dry and liquid food

Meets the requirements of FDA Title 21, Part 175.300 – dry food

Meets the requirements of FM

Meets the requirements of GB 14907:2018

Meets the requirements of GSB

Meets the requirements of ISO 15741

Meets the requirements of ISO 22899-1 – Jet fire

Meets the requirements of Qualicoat Class 2

Meets the requirements of ISO 22899-3 – Jet fire

Meets the requirements of Lloyd's Register (LR) Class Program

Meets the requirements of Lloyds Register (LR) Type Approval Program

Meets the requirements of Qualicoat Class 1

Meets the requirements of Qualicoat Class 3

Meets the requirements of RCSC Class B, Appendix A

Meets the requirements of Russian Maritime Register of Shipping (RMRS) Class Program

Meets the requirements of UL 1709

Meets the requirements of UL 2431

Meets the VOC content requirements for Estidama

Meets the VOC content requirements for GSAS

Pre-qualified in accordance with NORSOK M-501 in selected systems

Pre-qualified in accordance to NORSOK M-501

Tested in accordance with AAMA 2603

Tested in accordance with AAMA 2604

Tested in accordance with AAMA 2605

Tested in accordance with AMPP TM21442

Tested in accordance with AS/NZS 4020:2005

Tested in accordance with ASTM C1549

Tested in accordance with AWWA standard C213

Tested in accordance with ASTM D2485:2018

Tested in accordance with ASTM E84

Tested in accordance with BREEAM®

Tested in accordance with China Environmental Label

Tested in accordance with CSA-Z245.20

Tested in accordance with ISO 12944-9

Tested in accordance with ISO 19277:2018

Tested in accordance with ISO 21809

Tested in accordance with LEED®

Tested in accordance with the requirements of aviation fuel

Tested in accordence to ISO 17652-2

For more detailed and specific information about the standards, certificates and other documentation please see TDS or contact your local Jotun representative.

Key features

  • Superior compressive strength EN 1529
  • Excellent bond strength
  • Non-shrink
  • Solvent free
  • Easy to apply
  • DFT: 200 mic up to 3 mm

Jotafloor

Combining leading chemistry with outstanding technical support, the ever-expanding Jotafloor Floor Coating product catalogue offers quality beyond question.
Learn more

Documentation

Contact us about products

Do you want to know more about products and how we can help you find the best alternatives for your project? Submit your contact details here and we'll get in touch.