Global site
Fenomastic Emulsion Primer is a water-based emulsion primer that is alkali resistant, eliminating chalky surfaces. It is specially formulated to penetrate the substrate, filling cracks and dents and protecting the concrete. This product preserves the aesthetics of a wall by covering stains to prevent them bleeding into the new paint. It also increases the adhesion capabilities of the paint on the wall, making it last longer and reducing costs.
This primer has antibacterial properties that ensure hygienic standards are maintained at all times, making it suitable for use in healthcare, hospitality and other interiors that require high levels of hygiene.
Fenomastic Emulsion Primer has low VOC to ensure good indoor air quality. Once applied, it leaves a smooth and even surface that is ready for painting.
For more detailed product and colour information, please visit Fenomastic Emulsion Primer
This product contributes to Green Building Standard credits by meeting the following specific requirements:
LEED®v4 (2013) / LEED®v4 .1 (2019 ):
EQ credit: Low emitting materials
- VOC content for Primers, Sealers and Undercoaters (100 g/l) (CARB (SCM)2007) and emission lower than or equal to 0,5 mg/m3 (CDPH method 1.2)
MR credit: Building product disclosure and optimization
- Material Ingredients, Option 2: Material Ingredient Optimization, International Alternative Compliance Path -
REACH optimization: Fully inventoried chemical ingredients to 100 ppm and not containing substances on the REACH Authorization list – Annex XIV, the Restriction list – Annex XVII and the SVHC candidate list.
- Environmental Product Declarations. Product-specific Type III EPD (ISO 14025;21930, EN 15804).
BREEAM® International (2016)
- Mat 01: Product-specific Type III EPD (ISO 14025;21930, EN 15804).
BREEAM® International (2013)
Hea 02: VOC content for Interior matt walls and ceilings (Gloss <25 at 60°) (30 g/l) (EU Directive 2004/42/CE).
For more detailed and specific information about the standards, certificates and other documentation please see TDS or contact your local Jotun representative
Engineered to resist harsh weather conditions, from wide temperature fluctuations to high humidity.
Pilot ACR is a fast-drying acrylic topcoat with good colour and gloss retention.
Barrier 90 is an epoxy primer with 90% zinc dust for severe corrosive environments.
A cost-effective polyurethane topcoat for industrial use with an attractive appearance.
Do you want to know more about products and how we can help you find the best alternatives for your project? Submit your contact details here and we'll get in touch.
A video is being shown
An image is being displayed
A brochure is being displayed
